The Pioneer DDJ-SX is an advanced performance DJ controller designed
specifically for the Serato DJ Software. Pioneer's DDJ-SX Serato
based
DJ controller utilizes the software as the basis for its configuration
and ergonomic design, taking advantage of its features and
integrating
special trigger pads and controls. Pioneer also implemented
larger jog
wheels for precise mixing and scratching, multiple inputs for
expandability,
and 4-channel mixing flexibility.
Software: Serato DJ
Input terminals: CD x 2 (RCA), combined LINE/PHONO
x 2 (RCA), MIC x 2 (XLR&1/4 inch combined PHONE x 1, 1/4 inch PHONE x
1)
Output terminals: MASTER OUT x 2 (RCA x 1, XLR x 1), BOOTH OUT x 1 (1/4
inch PHONE), HEADPHONE MONITOR OUT x 2 (front 1/4 inch PHONE, MiniPin)
Other
terminals: USB B terminal x 1
Frequency range: 20 Hz to 20 kHz
Total
harmonic distortion: 0.003% or less
S/N ratio: 105 dB (PC)
Supplied AC
Adapter: Power source AC 100V 50/60 Hz, rated output DC5 V
Maximum Dimensions
(W x D x H inches): 26.14 x 14.06 x 2.77
Unit Weight: 12.79 pounds
SERATO
DJ SYSTEM REQUIREMENTS
Supported OS (Windows):
Windows 7
32-bit: (CPU) 2.0 GHz Core 2
Duo, (Memory) 2GB
64-bit: (CPU) 2.4 GHz Core 2 Duo, (Memory) 4GB
Supported
OS (Mac):
Mac OS X 10.7.4/10.6.8
32-bit: (CPU) 2.0 GHz Core 2 Duo,
(Memory) 1GB
64-bit: (CPU) 2.4 GHz Core 2 Duo, (Memory) 4GB
Display
resolution: 1,280 x 720 or higher resolution
b-52 matrix 2000
The B-52 Matrix 2000 is a complete sound reinforcement solution consisting of a pair of 12´´ 2-way speakers and an 18´´ subwoofer, equipped with a built-in 1200 watt 3-channel amplifier. The 3-channel amplifier houses all the electronics required to run the system including electronic crossovers, equalization and compressors. The electronic circuity is fine tuned to match all of the components for the best possible sound. The MATRIX 2000 is designed for easy operation, as you do not need to tweak frequencies or finesse levels. To set-up the system’s components, simply connect the XLR right and left signal cables, speaker cables and power cord and you’re ready to go!
The 18´´ subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the cast-framed, 4´´ voice coil, 18´´ subwoofer. The rear chamber houses all of the system’s electronic circuitry, which includes the amplification for all three components, power supply, compressor and preamps. The 18´´ subwoofer has a power handling capability of 600 watts and a nominal impedance of 8 ohms.
The 12´´ 2-way speakers are loaded with B-52 custom designed 12´´ loudspeakers and 1´´ titanium diaphragm compression drivers, mounted to 900 x 400 constant directivity horns. The speakers are designed to be pole mounted, sit as stage monitors and have built-in (3/8´´ – 16 TPI) flying hardware for permanent installations. The front panel of the 2-way speakers are convex so as to fit perfectly on to the subwoofer’s front grill. Each 2-way speaker has the power handling capability of 300 watts and a nominal impedance of 4 ohms.
To transport, simply move the subwoofer onto its casters and place the included cover over the subwoofer. Next, pull the included covers over the satellite speakers and close the zippers. It is recommended that you transport the subwoofer and satellites separately. You may transport all the components at the same time by placing the satellite speakers onto the subwoofer’s front panel facing down. Secure the satellite speakers to the subwoofer with the included locking strap by fastening it to the bar handles on the side of the subwoofer cabinet.
Complete system with speakers, subwoofer, amp and more
1200 watt 3-channel amp
Subwoofer power output: 600 watts @ 8 ohms
12´´ 2-way power output: 2 x 300 watts at 4 ohms
Subwoofer: 18´´ cast framed with 4´´ voice coil
Sub frequency response: 30-120Hz
Two 12´´ 2-way speakers with 1´´ titanium compression drivers
2-way frequency response: 120Hz-20kHz
Amp line in and parallel out: XLR
Speaker out: Speakon
Pure titanium diaphragm
Constant directivity horn
Satellite speakers are pole mountable or flyable
Can also be used as floor wedges
Flying hardware
Baltic birch construction
Built-in casters
Straps together for easy transport
Three dust covers included
2-ways speaker size (each): 23´´ x 14´´ x 13´´. Wt. 40 lbs.
Subwoofer size: 35´´ x 28´´ x 23´´. Wt. 160 lbs.
System size: 47´´ x 24´´ x 28´´. Wt. 245 lbs.
yamaha s115v & stageworks vp18b
Stageworks vp18b
Stageworks has raised the bar for value and performance in sound reinforcement enclosures. VP Series speakers offer impressive frequency response - sparkling highs and tight, punchy bass performance. Economical and roadworthy, VP Speakers are perfectly suited for live sound, DJs, club installations, speech or houses of worship.
VP Series enclosures are sturdy yet lightweight. You get high output capability and low distortion with excellent high frequency extension. Each crossover in the VP Series is built using the highest quality components and designed specifically for that system.
The cabinets are covered in a durable black carpet and feature recessed handles, black coated metal grills, and two 1/4" jacks - one for Input and one for Extension.
Frequency Response: 45Hz - 400Hz
Sensitivity 1W @ 1M (dB): 97dB
Power Handling (watts): 1200 Continuous; 1500 Music;2000 Peak
Max SPL (dB): 124dB
Nominal Impedance: 4 ohms
LF Driver: 18"
Input Connector: 1/4" jack x 2
yamaha s115v
Gigging bands, mobile DJs and houses of worship have helped make the first four generations of Yamaha Club Series Speakers incredibly popular. The refinements of generation V continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon and 1/4" connectors.
2-way cabinet with 15" LF Driver & 2" titanium HF Driver.
500W Program and 1000W Peak power rating.
Dual Speakon and 1/4" connectors.
55Hz-16kHz Frequency Response.
99dB Sensitivity.
129dB Max SPL.
Rockville RBG18S 18" 2000w DSP Powered Subwoofer
|
|